Motorola 7760, 7860, 2260, 8160, etc Nam Programming:


Nam Set: Fcn,0000000000000, Rcl
Nam Set: 74663#, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:


Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to “PrefMod”
4) RIGHT Softkey (Change) until you see “DigOnly”
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc Nam Programming:


Nam Set: ##1111 end
Nam Set: ##298645665 end
Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming:


Nam Set: 8378*# + press 3 times NATE (spc -071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#


Motorola StarTac 2004 Nam ProgrammingrTac 2004 Nam Programming:


Nam Set: 5759789*#, rec key (3)times (spc -915037)

Motorola ms200, ms230, etc Nam Programming:


Nam Set: 5759789*# (spc -915037)

Motorola v6060 Nam Programming:


Nam Set:147*369#456*0#

Motorola v60, c120, c331, etc:

  1. Turn on the phone. Press MENU 0 73 8 87 *
  2. The phone will require you to “Enter a Security Code”, press 000000, OK
  3. Scroll down to “Test mode” choose SELECT. Scroll down to “Enable” choose SELECT. Your phone is now in test mode.
  4. Signal strength is the 3_rd number down on the left hand side of the screen.
  5. To toggle between regular mode and test mode: Press MODE then quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
  6. To turn off the test mode the phone must be in regular mode, then follow the above sequence and scroll down to where it says “DISABLE” instead of “ENABLE” and choose select.